Keces P3 Ultra Low Noise Twin Linear Power Supply

Beschrijving

• Two fully separate power supplies (no ground loop possible)
• Output voltages in different configurations
• Each of the six output voltages has fine adjustment +/- 0.5 V
• Output current 2 X 3 A
• Over voltage, over current and under voltage protection
• Over temperature protection
• Power supply circuits built with discrete components
• Extremely low noise level
• High quality custom made toroidal transformer
• No 50 Hz humming or buzz noise
• Enclosure made of 3 mm aluminum; fully shielded against EMI/RFI
• Radiation free to prevent polluting other equipment
• DC outputs on 5.5/2.5 mm connectors
• AC Input Voltage 110-120 V 60 Hz & 220-240 V 50 Hz (switchable)
• Power consumption 120 Watts maximum (at full load)
• Weight 3.5 kg / 7.7 lbs
• Dimension 220x220x80 mm / 8.7×8.7×3.2 inch

Ultra Low Noise Linear Power Supply

A known issue with audio/video gear is the sensitivity for the power supply connected. Many devices come with a switch mode power supply as a standard, because it is way cheaper. An astonishing upgrade can be achieved with these devices by swapping the standard power supply for a better one. Musicality will increase noticeably, background will be quiter and dynamics will be enhanced.

The Keces Audio linear power supplies are THE upgrades that combine power, precision and efficiency in a unique way, making it the best choice for any audio/video enthusiast. A very easy way to upgrade your streamer, D/A converter, phono preamp, turntable, settop-box, video processor, media player, headphones amp, electrostatic speakers (Martin Logan) and the like substantially. Even connecting it to your modem, router or network switch will yield a substantial improvement!

Using the Keces P3 power supply, you can power two devices simultaneously, even if they require different voltages, as the P3 is available in two different versions: with two voltages in the same range or with two voltages in a different range. In all cases, you may draw up to 3 Amps per output. Electronics inside are from an exceptional reliability and have a high efficiency, compared to normal linear power supply designs, so energy waste is kept to a minimum. Stabilisation is done using a discrete design, there’s no standard voltage regulator IC.

What you will hear from all of this, is a far more natural reproduction with more power and dynamics that will go hand in hand with an increased quiteness.